A Shell-by-Shell Approach for Synthesis of Mesoporous Multi-Shelled Hollow MOFs for Catalytic Applications

Over the past two decades, advanced materials with hollow interiors have received significant attention in materials research owing to their great application potential across a vast number of technological fields. Though with great difficulty, multi-shelled hollow metal–organic frameworks (MSHMs) have also been successfully synthesized in recent years. Herein, a rational shell-by-shell soft-templating protocol has been devised to fabricate highly uniform multi-shelled hollow cobalt-imidazole-based MOF (ZIF-67). For the first time, it has become possible to endow mesoporosity to this new type of functional material (i.e., mesoporous MOFs). When used as carrier materials in catalytic reactions, in principle, these mesoporous MSHMs with high surface area not only improve the dispersity of metal nanoparticles (NPs), but also efficiently facilitate the mass diffusion of the reactions, resulting in enhanced catalyst activity. Moreover, the obtained MSHMs/M nanocomposites serve as base-metal bifunctional catalysts for one-pot oxidation-Knoevenagel condensation cascade reaction, in which the MSHMs itself serves as a pristine active catalyst in addition to its role of catalyst support. The results demonstrate that excellent multifunctional catalysts can be achieved via preparing intrinsically microporous bulk MOFs into extrinsically mesoporous MSHMs which possess many structural merits that conventional bulk MOFs do not have.     

增材制造金属反射镜的发展综述

随着光学测量与遥感领域的不断发展,折反式光学系统对重量、体积和环境适应性等需求不断提高。基于增材制造技术的金属反射镜以其便于实现优化设计、快速制造和加工工艺性好等优点,逐渐获得国内外学者的关注与研究。与传统金属反射镜相比,增材制造金属反射镜可以提高反射镜的结构刚度,同时可实现更高程度的轻量化。增材制造反射镜可以满足光学系统对环境适应性和快速性的需求。本文首先讨论了金属反射镜的评价指标;其次,综述了国内外在基于增材制造技术制备金属反射镜领域的发展现状和技术参数,从增材制造金属反射镜的基体设计与制备和基体的后处理2个方面展开论述;然后,通过分析,总结了增材制造金属反射镜的技术路线和关键技术;最后,对增材制造反射镜的应用前景提出了展望。     

聚苯硫醚熔体的压致凝固行为

采用施加压力的方法将聚苯硫醚熔体凝固,凝固后获得的聚苯硫醚样品经过降温和卸压后在常温常压下回收. X射线衍射和差示扫描量热分析表明:约20 ms时间的快速压缩过程可以抑制熔体结晶,制备出非晶态聚苯硫醚块材,样品的表面及中心都是非晶态.非晶态聚苯硫醚的玻璃化转变温度和晶化温度分别为318和362 K.常压下的退火实验表明,非晶态聚苯硫醚在425 K等温结晶的产物为正交相晶型.压致凝固法中熔体的凝固不是靠温度变化,而是靠压力变化,样品表面和内部处在一致的温度下同时受压凝固,避免了热传导对非晶尺寸的影响,因此非常有利于获得结构均匀的大尺寸非晶态材料.     

Crystal structure of K[PtCl3(caffeine)] and its interactions with important nitrogen-donor ligands

The crystal structure of K[PtCl₃(caffeine)] was determined. The coordination geometry around platinum is square-planar formed by N9 of the caffeine ligand and three Cl^? ions. The bond lengths and angles of K[PtCl₃(caffeine)] were compared with those reported for [PtCl₃(caffeine)]^? and K[PtCl₃(theobromine)]. At the level of the statistical significance of the data we have compared, no differences in the bond distances and angles for any of these compounds were noticed. Weak interactions between K⁺ and Cl^? are responsible for the formation of 1-D polymeric chains in the crystal structure of the complex. The interactions of K[PtCl₃(caffeine)] with inosine (Ino) and guanosine-5′-monophosphate (5′-GMP) were studied by ¹H NMR spectroscopy at 295 K in D₂O in a molar ratio of 1 : 1. The results indicate formation of the reaction product [PtCl₃(Nu)] (Nu=Ino or 5′-GMP) with the release of caffeine from the coordination sphere of the starting complex. The higher stability of the bond between the Pt(II) ion and Ino or 5′-GMP compared to the stability of the platinum–caffeine bond is confirmed by density functional theory calculations (B3LYP/LANL2DZp) using as models 9-methylhypoxanthine and 9-methylguanine.     

Pd‐initiated polymerization of diazo compounds bearing dialkoxyphosphinyl group and hydrolysis of the resulting polymers and oligomers to afford phosphonic acid‐containing products

Pd‐initiated polymerization and oligomerization of diazo compounds containing a dialkoxyphosphinyl group are described. Polymerization of 2‐dialkoxyphosphinylethyl diazoacetates with π‐allylPdCl‐based initiating systems afforded C? C main chain polymers bearing phosphonate on each main chain carbon atom. The quantitative transformation of the side chain phosphonate to phosphonic acid resulted in the formation of water soluble polymers having the acid groups accumulated around their main chains, although the carbonyl ester linkage in the side chain was cleaved via intramolecular acid‐assisted hydrolysis in water at 80 °C. Pd‐initiated oligomerization of diethyl diazomethylphosphonate yielded an oligomeric product bearing diethoxyphosphiny groups directly attached to its main chain carbons, with unexpected incorporation of azo group in the main chain framework. Hydrolysis of the phosphonate of the oligomer afforded a water‐soluble product, which was revealed to show higher proton conductivity than poly(vinylphosphonic acid) under certain conditions. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 1742–1751     

Low-molecular weight hyaluronidase from the venom of Bungarus caeruleus (Indian common krait) snake: Isolation and partial characterization

Snake venom hyaluronidases known as “spreading factor” are not extensively studied. Recently, it is argued that beyond its role as a spreading factor, venom hyaluronidase (HYL) deserves to be explored as a possible therapeutic target for inhibiting the systemic distribution of venom/toxins and also for minimizing local tissue destruction. In this context, in the present study, a low-molecular weight HYL has been isolated from Bungarus caeruleus (Indian krait) venom by single step chromatography on HPLC system. The apparent molecular weight determined by SDS-PAGE is 14 ± 2 kDa, as confirmed by zymogen study and LC–MS as well. The enzyme had optimal pH 6 and temperature 37°C. The Michaelis–Menten constant (K_m) was found to be 8.48 µg/mL at 37°C. The activity of purified enzyme was completely inhibited by Ba²⁺ metal ion and N-acetyl imidazole group-specific agents. This work yielded a highly active HYL from B. caeruleus the first one to be isolated. Further studies on its pharmacological actions will be interesting to develop lead molecules for better management of snakebite.     

A highly active multi‐usable palladium pyridylfluorene film‐based catalyst for C–C cross‐coupling reactions

The two terminal pyridyl nitrogen atoms of 2,7‐bis(4‐pyridyl)fluorene ( 1 ) were coordinated to Pd(II) ions to give self‐assembled, multilayer films using the layer‐by‐layer (LbL) method. The films were prepared by alternately dipping the substrate, pre‐coated with a polyethyleneimine layer, in aqueous solutions of PdCl₂ and ethanol solutions of 1 . The resulting films were characterized using UV–visible absorption spectroscopy, atomic force microscopy (AFM), X‐ray photoelectron spectroscopy, scanning electron microscopy (SEM) and inductively coupled plasma atomic emission spectroscopy (ICP‐AES). UV–visible spectra and SEM images show almost uniform growth of the film in a near ideal LbL manner. AFM images show that nanostructured aggregates of Pd(II) complexes form on the surface. With an increase in the number of Pd(II)/ 1 bilayers, more particulate aggregates are distributed on the surface. When released from the substrate, the Pd(II) complex nanostructure shows high catalytic activity for Suzuki–Miyaura and Mizoroki–Heck cross‐coupling reactions. The catalyst loading is as low as 9.1 × 10^?3 mol% Pd, as measured using ICP‐AES, and high turnover numbers of up to 1.08 × 10⁴ are obtained. Copyright © 2015 John Wiley & Sons, Ltd.     

The First One‐Pot Synthesis of Metal–Organic Frameworks Functionalised with Two Transition‐Metal Complexes

The synthesis of a metal–organic framework (UiO‐67) functionalised simultaneously with two different transition metal complexes (Ir and Pd or Rh) through a one‐pot procedure is reported for the first time. This has been achieved by an iterative modification of the synthesis parameters combined with characterisation of the resulting materials using different techniques, including X‐ray absorption spectroscopy (XAS). The method also allows the first synthesis of UiO‐67 with a very wide range of loadings (from 4 to 43 mol %) of an iridium complex ([IrCp*(bpydc)(Cl)Cl]^2?; bpydc=2,2′‐bipyridine‐5,5′‐dicarboxylate, Cp*=pentamethylcyclopentadienyl) through a pre‐functionalisation methodology.     

Selectivity Effects in Bimetallic Catalysis

An emerging area of homogeneous catalysis is the use of catalysts featuring two closely associated metal sites. This approach complements the traditional focus on single‐site catalysts and makes available new parameters with which to optimize catalytic behavior. Single‐site catalysts are optimized through changing 1) the identity of the metal, and 2) the steric and electronic properties of the ligands. Bimetallic catalysts introduce new optimization parameters such as 3) catalyst nuclearity (mononuclear vs. binuclear), and 4) bimetallic pairing (relative compatibility of two metal sites). In order to harness these new optimization parameters in developing systems, it is necessary to first understand the origin of bimetallic selectivity effects that already have been documented. This Concept article highlights bimetallic effects on the chemo‐, regio‐, and stereoselectivity of catalytic transformations, using selected case studies from the recent literature as illustrative examples.